Villager VLN 9120, Original Instruction Manual

Page: 15 / 82

6
Villager VLN 9120 (GB)
Battery Safety
WARNING: Li-ion batteries, if incorrectly used, stored or charged, are a fire,
burn and explosion hazard.
•
Keep the battery out of reach of children.
•
ONLY charge Villager Li-Ion batteries using the charger designed specifically for
the product.
•
ONLY use Villager Li-Ion batteries specifically designed to be compatible.
•
Allow batteries to cool for 15 minutes after charging or heavy use. Failure to
follow these instructions may cause overheating or fire.
•
When not in use batteries should be stored at room temperature
(approximately 20°C).
•
Ensure battery contacts cannot accidentally short in storage. Keep batteries
clean; foreign objects or dirt may cause a short. Keep away from other metal
objects, for example paperclips, coins, keys, nails and screws.
•
Under abusive conditions, liquid may be ejected from the battery. This liquid
may cause skin irritation or burns. Avoid contact. If contact occurs accidentally,
flush with water. If liquid contacts eyes, seek medical help.
•
DO NOT open, disassemble, crush, heat above 60°C, or incinerate. Do not
dispose of in fire or similar.
Product Familiarisation
1. Spotlight
2. Swivel Joint
3. Angle Joint
4. On/Off Switch
5. Insulated Handle
6. Battery Slot
Intended Use
The cordless worklight is intended for mobile illumination in limited space and for
limited time in dry indoor and outdoor areas and is not suitable for general room
lighting.
Unpacking Your Tool
•
Carefully unpack and inspect your tool. Fully familiarise yourself with all its
features and functions.
•
Ensure that all parts of the tool are present and in good condition.