Villager VLN 1760, Original Instruction Manual

Page: 22 / 88

Villager VLN 1760 (GB)
10
LUBRICATION
1. Cap
2. Wrench
This tool requires lubrication because it has a grease-packed lubrication system. Check the
lubrication levels as often as possible. It should be relubricated after every 6 months of
operation. Send the complete tool to a service center to perform this lubrication service for
you. However, if circumstances require that you should lubricate it by yourself, proceed as
follows.
First, switch off and unplug the tool.
Remove the cap using a wrench 23, then replenish with fresh grease (60g). Filling in with more
than the specified amount of grease can cause faulty hammering action or tool failure. Fill in
only with the specified amount of grease.
1. Hammer grease