Villager VLN 1095, Original Instruction Manual, Page: 22 / 146

6
Villager VLN 1095 (GB)
•
Ensure the supply voltage is same as rating voltage.
•
The tool is double insulated for additional protection against a possible
electrical insulation failure within the tool.
•
After long working periods, external metal parts and accessories could be hot.
•
Wear eye protection when operating this tool.
•
Always check the workpiece before operation and remove any obstructions
such as nails, staples, screws, string, rags, cloths and other debris. Do not cut
into nails, screws or other metal objects.
•
Check the position of power cables before commencing work ensuring they are
well away from the work area.
•
Do not use worn or damaged planer blades. This may result in motor overload
and substandard work.
•
Keep hands and other body parts well away from the blades while the planer is
in use. Do not attempt to remove cut material whilst the planer is in operation
or reach underneath for any reason.
•
Keep fingers and hands well away from the dust extraction outlet whilst the tool
is in use.
WARNING!
Some dust created by power Planing, cutting and other construction activities
contains chemicals known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
-
Lead from lead-based paints
- Crystalline silica from bricks and cement and other masonry products
- Arsenic and chromium from chemically-treated lumber
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well-ventilated area,
and work with approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
NOISE INFORMATION
Wear hearing protection!
Measured sound values determined according to EN 62841.
The noise figures quoted are emission levels and are not necessarily safe working
levels.