Villager VLN 1095, Original Instruction Manual, Page: 21 / 146

5
Villager VLN 1095 (GB)
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power
tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools and accessories. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that may affect the
power
tool’s operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean . Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed.
Use of the power tool for operations different from those intended
could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and grease .
Slippery handles and grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
5) Service
a)
Have your power tool serviced by a qualified repair person using only
identical replacement parts
. This will ensure that the safety of the power tool is
maintained.
Planer safety warnings
Wait for the cutter to stop before setting the tool down. An exposed rotating
cutter may engage the surface leading to possible loss of control and serious injury.
Hold the power tool by insulated gripping surfaces, because the cutter may
contact its own cord.
Cutting a "live" wire may make exposed metal parts of the
power tool "live" and could give the operator an electric shock.
Use clamps or another practical way to secure and support the workpiece to a
stable platform.
Holding the workpiece by your hand or against the body leaves it
unstable and may lead to loss of control.
Additional safety information and tips
•
Remove the plug from the socket before carrying out any adjustment, servicing
or maintenance.
•
Fully unwind extension cords to avoid potential overheating.
•
When an extension cord is required, please ensure it has the correct ampere
rating for the power tool and that it is in a safe electrical condition.