Villager VGP 1100 F, Original Instructions Manual, Page: 19 / 116

8
Villager VGP 1100 F (GB)
6. Please immerse the
water inlet in water for
10cm at least
6. Please check whether
the water source is
enough, then, immerse
the water inlet in water
for more than 10cm .
7. The joint of suction
pipeline is untighted
7. Please replace the
joint sealing element
and completely seal the
joint.
Error shooting Reasons Response measures
The product is closed in
a short period. 1. The pipeline or pump
suffer from abnormal
obstruction and the
thermal circuit breaker
has cut off the
electrical circuit.
1. Please get rid of the
plugging matters, then,
power on and draw
water after the pump
has cooled completely.
2. Due to the xcessively
High environment or
water temperature, the
thermal circuit breaker
has cut off the electrical
circuit.
2. Please ensure that
the water and
environment
temperature is less than
35°C, then, power on
and draw water.
3. Due to the pressure
in the pipeline, the
pressure switch shall
shut off the power.
3. Please open the
faucet, at this moment,
the pressure switch will
start automatically after
depressurization.
4. The obstruction is
caused by the damaged
impeller.
4. Please ask the
maintenance
department to make
inspection.