Villager VEM 1050, Original Instruction Manual, Page: 22 / 62

Villager VEM 1050 (GB)
10
CLEANING AND MAINTENANCE
Always pull out the mains power plug before starting any cleaning work.
CLEANING
•
Keep all safety devices, air vents and the motor housing - free of dirt and dust
as far as possible. Wipe the equipment regularly with clean cloth or blow it
with compressed air at low pressure.
•
We recommend that you clean the device immediately - each time you have
finished using it.
•
Clean the equipment regularly with a moist cloth and some soft soap. Do not
use cleaning agents or solvents; these could attack the plastic parts of the
equipment. Ensure that no water can seep into the device.
CARBON BRUSHES
In case of excessive sparking, have the carbon brushes checked only by a qualified
electrician. The carbon brushes should not be replaced by anyone but a qualified
electrician.
MAINTENANCE
There are no parts inside the equipment which require additional maintenance.
ENVIRONMENTAL PROTECTION AND DISPOSAL
Packaging materials are raw materials and can be re-used. Separate
the different packaging materials and take them to a designated
waste disposal facility. More information can be obtained from the
appropriate authorities.
Old machines do not belong in your household garbage. Dispose of
old machines appropriately. We are all responsible for the
environment. The local authorities can inform you of collection
locations and working hours.