Villager VEM 1050, Original Instruction Manual, Page: 21 / 62

Villager VEM 1050 (GB)
9
•
Always disconnect plug from power source before making any adjustment or
changing any accessory.
•
Always use the additional handle.
•
Always expect reaction torque.
BEFORE STARTING THE MACHINE
Before you connect machine to the mains supply, make sure that the data on the
model plate are identical to the mains data. Fit the additional handles (4) to the
unit.
Starting the machine
Switching on/off
Select the speed by pressing the switch to a greater or lesser extent. To preselect
the speed turn the knurled screw on the switch.
To start the power tool, first press the lock-off button (6), then press the on/off
switch (1) and keep it pressed. Note: For safety reasons, the on/off switch (1)
cannot be locked; it must remain pressed during the entire operation. To switch off
the power tool, release the on/off switch (1).
You can select the direction of rotation using the switch (2) .
WORKING WITH THE PAINT AND MORTAR MIXER
THE ADDITIONAL HANDLE MUST BE FITTED!
The mains plug must first be disconnected when you wish to change the mixer tool.
When you insert the mixer or take it out, reduce its speed. Once the mixer is fully
immersed in the product, increase the speed to maximum to ensure that the motor
is cooled adequately. During the mixing process guide the machine through the
mixing vessel. Continue to mix the product until it is fully homogenized. When you
have finished the mixing work - clean the mixer.