Villager VDS 625, Original Instruction Manual, Page: 29 / 145

12
Villager VDS 625 (GB)
allergic reactions and/or respiratory diseases to the operator or bystanders);
wear a dust mask and work with a dust extraction device when connectable.
•
Certain kinds of dust are classified as carcinogenic (such as oak and beech dust)
especially in conjunction with additives for wood conditioning;
wear a dust
mask and work with a dust extraction device when connectable.
•
Follow the dust-related national requirements for the materials you want to
work with.
•
Do not clamp the tool in a vice.
•
Use completely unrolled and safe extension cords with a capacity of 16 Amps
(U.K. 13 Amps).
AFTER USE
•
After switching off the tool, never stop the rotation of the accessory by a lateral
force applied against it.
USE
Shaft ②
- Fold the front and back part together (2a).
- Push the folding lock E to the right position and keep the tip adjacent to the
handle (2b).
- Press the folding lock E towards the handle until the end. (2c) Unfold the handle
by pushing the folding lock to the inside.
Replace sanding pad ③
- Insert the hex wrench (size 5) into the hexagonal screw bolt on the sanding
block.
- Hold the sanding pad firmly, and then turn the wrench counter clockwise to
dismount the pad.
- Install new sanding pad by tightening the bolt.
Warnning: Only install the specified sanding pad on the machine. In order
to ensure optimal performance, the machine should be run at slightly
lower speed for several minutes to make the grinding pad fit the sealing surface
perfectly. During this process, the white foam particles will come out from the
sanding head. However, this won't damage the machine.