4
Villager
AGM ET 300 (EN)
Recommendation
The machine should be supplied via a residual current device (RCD) with a tripping
current of not more than 30 mA.
Vibration and noise reduction
To reduce the impact of noise and vibration emission, limit the time of operation,
use low-vibration and low-noise operating modes as well as wear personal
protective equipment.
Take the following points into account to minimise the vibration and noise
exposure risks:
1.
Only use the product as intended by its design and these instructions.
2.
Ensure that the product is in good condition and well maintained.
3.
Use correct attachments for the product and ensure they are in good condition.
4.
Keep tight grip on the handles/grip surface.
5.
Maintain this product in accordance with these instructions and keep it well
lubricated (where appropriate).
6.
Plan your work schedule to spread any high vibration tool use across a longer
period of time.
Emergency
Familiarise yourself with the use of this product by means of this instruction
manual. Memorise the safety directions and follow them to the letter. This will
help to prevent risks and hazards.
1.
Always be alert when using this product, so that you can recognise and handle
risks early. Fast intervention can prevent serious injury and damage to property.
2.
Switch off and disconnect from the power supply if there are malfunctions.
Have the product checked by a qualified professional and repaired, if necessary,
before you operate it again.
Residual risks
Even if you are operating this product in accordance with all the safety
requirements, potential risks of injury and damage remain. The following dangers
can arise in connection with the structure and design of this product:
1.
Health defects resulting from vibration emission if the product is being used
over long periods of time or not adequately managed and properly maintained.
2.
Injuries and damage to property due to broken cutting attachments or the
sudden impact of hidden objects.
Summary of Contents for AGM ET 300
