manualshive.com logo in svg

Viking VK960, Technical Data Manual

Share
Download
Viking VK960 Technical Data Manual Download Page 3

SPECIFIC APPLICATION 

WINDOW SPRINKLERS 

(K5.6)

TECHNICAL DATA

Form No. F_042519     21.09.28     Rev 21.3

© 2021 Viking Group Inc. All rights reserved

Page 3 of 10

The Viking Corporation, 210 N Industrial Park Drive, Hastings MI 49058

Telephone: 269-945-9501  Technical Services: 877-384-5464  Fax: 269-818-1680  Email: [email protected]

Visit the Viking website for the latest edition of this technical data page www.vikinggroupinc.com

APPROVAL CHART

Viking Specific Application Pendent Vertical Sidewall 

Window Sprinklers 

VK960 K5.6 (80.6 metric)

Maximum 175 PSI (12 Bar) WWP

Sprinkler Base 

Part Number

1

Thread Size

Listings and Approvals

2

NPT

Inch

BSPT

mm

cULus and ICC-ES

5

23832

1/2

--

A1

23829

--

15

A1

Approved Temperature Rating Codes:

A

 = 155 °F (68 °C) and 200 °F (93 °C) 

Approved Finish Codes:

1

 = Brass, Chrome, White Polyester 

3,4

, Black Polyester 

3,4

, and ENT

 4

Footnotes

1 

Base Part number is shown. For complete part number, refer to Viking’s current price schedule.

2 

This table shows the listings and approvals available at the time of publication. Check with the manufacturer for any additional approvals.

3 

Other colors are available upon request with the same Listings and Approvals as the standard colors.

4 

cULus Listed as corrosion resistant.

5 

See ICC-ES Evaluation Report No. ESR-4288 at 

www.icc-es.org

.

APPROVAL CHART

Viking Specific Application Horizontal Sidewall  

Window Sprinklers 

VK962 K5.6 (80.6 metric)

Maximum 175 PSI (12 Bar) WWP

Sprinkler Base 

Part Number

1

Thread Size

Listings and Approvals

2

NPT

Inch

BSPT

mm

cULus and ICC-ES

5

23834

1/2

--

A1

23831

--

15

A1

Approved Temperature Rating Codes:

A

 = 155 °F (68 °C) and 200 °F (93 °C) 

Approved Finish Codes:

1

 = Brass, Chrome, White Polyester 

3,4

, Black Polyester 

3,4

, and ENT

 4

Footnotes

1 

Base Part number is shown. For complete part number, refer to Viking’s current price schedule.

2 

This table shows the listings and approvals available at the time of publication. Check with the manufacturer for any additional approvals.

3 

Other colors are available upon request with the same Listings and Approvals as the standard colors.

4 

cULus Listed as corrosion resistant.

5 

See ICC-ES Evaluation Report No. ESR-4288 at 

www.icc-es.org

.

Summary of Contents for VK960




















Reviews:

No comments

Brands by name

Popular brands

Load more brands