background image

STANDARD RESPONSE 

FUSIBLE LINK UPRIGHT 

SPRINKLER VK108 (K5.6)

TECHNICAL DATA

Page 2 of 5

Form No. F_052214    21.09.29     Rev 21.1

The Viking Corporation, 210 N Industrial Park Drive, Hastings MI 49058

Telephone: 269-945-9501  Technical Services: 877-384-5464  Fax: 269-818-1680  Email: [email protected]

Visit the Viking website for the latest edition of this technical data page www.vikinggroupinc.com

5.  OPERATION

During fire conditions, the heat-sensitive fusible link disengages, the pip cap and spring are released, and the waterway is opened. 

Water flowing through the sprinkler orifice strikes the sprinkler deflector, forming a uniform spray pattern to extinguish or control 

the fire.

6.  INSPECTIONS, TESTS AND MAINTENANCE

Refer to NFPA 25 for Inspection, Testing and Maintenance requirements. 

7.  AVAILABILITY

The Viking Standard Response Fusible Link Upright Sprinkler VK108 is available through a network of domestic and international 

distributors. See The Viking Corporation web site for the closest distributor or contact The Viking Corporation.

8.  GUARANTEE

For details of warranty, refer to Viking’s current list price schedule or contact Viking directly.

Summary of Contents for VK108











Reviews: