21
Attach to
unit with
these screws
Screws and slots
for adjustments
The kickplate consists of a two (2) part assembly: one top louvered panel and one bottom solid
panel. Install the kickplate with louvered section on the top. Flooring must allow the kickplate
to be removed.
To install:
1. Insert the bottom (solid) panel into the open end of the top (louvered) panel. The holes in
the bottom panel should line up with the slots in the top panel.
2. Position the kickplate assembly along the front edge of the wine cellar.
3. Align the holes on both ends of the top (louvered ) panel with the holes in the base of the
wine cellar.
4. Attach the kickplate to the wine cellar on each side with the two black phillips head screws
provided.
5. Adjust the bottom (solid) panel to the desired height and fasten in place by tightening the
screws in the slots. There is approximately 1” (2.5 cm) of vertical adjustment on the
kickplate.
Kickplate Installation
