Viking Oxeo, Installation And Maintenance Manual

Page: 124 / 238

Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
118
Personnel:
•
Authorized Distributor
Protective equipment:
•
Safety goggles
•
Safety gloves
•
Safety footwear
The precision steel pipe is hereinafter referred to as “pipe.”
FIGURE 5-42: Minimum pipe lengths
WARNING Danger due to contamination
Contaminated pneumatic pilot lines or pipelines can cause individual components to malfunction
and thus also cause the whole system to malfunction. This can cause serious injury or even death,
and may also cause substantial property damage.
• Before assembly, check all pneumatic pilot lines and pipelines for contamination (e.g.particles or
grease) and clean if necessary.
Only if the necessary auxiliary materials are used and the following work steps are
observed can technically flawless and operationally safe connections between preci-
sion steel pipes and cut ring unions be established.
WARNING Danger of a malfunction from improperly installed pilot lines
Observe the minimum pipe lengths: