RA_6360_6375_01 - EN
11
- Handlebar -
02.04
Closing housing
halves
02.04.02 Attaching inside right
housing half
- Install reinforcement strut
- Install right/left cable guide
- Attach inside left housing half
• Fit inside right housing half
1
onto
handlebar.
• Tighten screws
2
,
3
(1-2 Nm).
1
3
2
2
2
02.04.01 Attaching outside right
housing half
• Fit housing half
1
and tighten
screw
2
(1-2 Nm).
1
2
02.04.03 Attaching outside left
housing half
• Fit outside left housing half
1
onto handlebar and tighten
screw
2
(1-2 Nm).
1
2
Models without blade clutch /
without Quick-Start
• Insert cable support and attach
motorstop cable.
2
1
Models with blade clutch /
with Quick-Start
• Attach blade clutch cable
1
.
• Push wheel drive control bar
1
to the
left and then attach in bore
A
.
A
1
- Attach inside left housing half
1
