RA_6360_6375_01 - EN
8
- Handlebar -
02.01
Replacing cable guide
02.01.01 Removing right / left
cable guide
02.01.02 Installing right / left
cable guide
02.02.02 Installing
reinforcement strut
02.02
Replacing
reinforcement strut
02.03
Opening housing
halves
02.02.01 Removing
reinforcement strut
• Lever off cable guide(s)
1
from
handlebar using a screwdriver
2
.
• Push cable guide(s)
1
into housing
2
and clip onto handlebar.
02.
Handlebar
1
2
2
1
2
1
• Remove cap nuts
1
and remove
washers
2
.
• Pull out bolts
3
from handlebar and
remove strut
4
.
1
2
3
4
3
2
1
• Fit strut
1
and insert bolts
2
through
handlebar.
• Install cap nuts
4
with washers
3
and tighten (8-10 Nm).
4
3
2
1
2
3
4
02.03.01 Removing inside right
housing half
- Remove right / left cable guide
• Push wheel drive control bar
1
to the
left and detach from inside right
housing half
2
.
• Pull wheel drive control bar
1
upwards and rest on right housing
halves.
1
2
2
1
