Viking K-1700-BN-IP, Product Manual, Page: 11 / 26

11
Programming Features Index
DESCRIPTION Section Page
Connect/Disconnect B 7
VLAN Settings D 9
Unit Name 1 12
SIP Server 2 12
Peer to Peer Settings 3 12
Outbound Proxy 4 12
Authentication ID 5 12
Register Fails 6 12
Phone Number Database 7 13
Event Log 8 14
Entry Code Database 9 15
Keyless / Card Logging 10 15
Security code (factory set to 845464) 11 15
Access Code (1 - 6 digits, blank = disabled, factory set to 123456) 12 15
Weigand Direction 13 16
Select Time Zone 14 16
Daylight Savings 15 16
Internal / External Relays (factory set to Internal) 16 16
Relay Mode (Door Strike, Outbound Call, In / Outbound Call, Doorbell, Alarm, Ring, Ring Flash, factory set to Door Strike) 17 17
Relay Act (Activation) Command (1 or 2 digits, factory set to
QQ
) NOTE: Relay Mode must be set to Door Strike 18 17
Relay Act (Activation) Time (0.5 - 99 seconds, factory set to 5 seconds) 19 17
Relay Activation Delay (Disabled or 0.5 - 99 seconds, factory set to Disabled) 20 17
Relay Buzz Volume (1 - 3 or Disabled, factory set to 3) 21 17
Relay Latch Commands (Enabled or Disabled, factory set to Enabled) NOTE: Relay Mode must be set to Door Strike 22 18
Speaker Mode (ON, OFF / Silent Monitor or OFF until Answered, factory set to ON) 23 18
Speaker Volume (0 - 9, factory set to 3) 24 18
Ring Volume (0 - 9, factory set to 5) 25 18
Microphone Volume (0 - 9, 0 = Auto, factory set to 5) 26 18
In-Band Audio Call Progress (Enabled, Disabled, factory set to Enabled) 27 18
In-Band Audio Detect Sensitivity (1 - 9, 1 = minimum, 9 = maximum, factory set to 5, power cycle unit after setting) 28 18
Talk/Listen Delay (VOX) (0.1 - 0.9 seconds, factory set to 0.5 seconds) 29 18
Phone Mode (Auto Dialer or Manual Dial Phone, factory Set to Auto Dialer) 30 18
Call Length Time Out (disabled or 1 - 9 minutes, factory set to 3 minutes) 31 19
Inbound Call Mode (Disabled, Auto Answer, Auto Answer-Secure, Ring, Ring with AGC, Silent Monitor, Silent Monitor Secure, Factory
set to Auto Answer)
32 19
Ring Cadence (factorty set to Normal Ring, 2 seconds on 4 seconds off) 33 19
Dial Next Number on RNA (Ring No Answer) (disabled, 1 - 9 = number of rings, factory set to 7) 34 19
Dial Next Number on Busy (disabled or enabled, factory set to enabled) 35 19
In Call Dialing Format (Inband DTMF or RFC2833, factory set to RFC2833) 36 20
Call Button Delay 37 20
Call Button Auto Dial 38 20
Mute Current / Next Alarm 39 20
Permanent Alarm Mute 40 20
IP Firmware 41 20
Unit Firmware 42 21
Import/Export 43 21
Clear Unit Settings 44 21
Clear IP Settings 45 21
Diagnostics (used to check mic, speaker, relays and proximity card reader operation) 46 21
REX Input 47 21