background image

11 

 



Access reservoir (Fig. 1) 

1. 

If present, remove the bottom grow tray 

2. 

Slide out drawer to access the reservoir 

 



Fill reservoir 

1. 

Make sure that the unit has been connected to the water and power 
according to local codes 

2. 

From the HOME screen, press SET UP, SET RESERVOIR, AUTO ON, FILL 

3. 

Wait until the reservoir is full with water. Monitor the filling of the res-
ervoir to assure proper fill. 

Fig. 1 

Fig. 2 

Fig. 5  Zone      
irrigation nozzle 

Irrigation pump 



Priming 

1. 

Access the priming valve near the irrigation pump. It should be in the OPEN position

 

and 

water should be flowing downwards into the reservoir 

2. 

From the HOME screen, choose ZONE 2 (

A

). This will be the growing zone that is directly 

above the pump.  Press WATER NOW (

B

). 

3. 

Open (1/4 clockwise turn) and wait for steady stream of water to come out of the priming 
valve (Fig 3); once you have a steady stream of water, close the valve (Fig 4). 

4. 

Water should now be flowing steadily from the irrigation nozzle in the zone selected in 
step 

(Fig. 5).  Press WATER NOW (

B

) to turn off the watering cycle for that zone. Leave 

the priming valve in the CLOSED position. 

 
Your pump is now primed. 

Fig. 4  
Priming valve in 
CLOSED position 

Fig. 3  
Priming valve in 
OPEN  position 

Priming valve 

START-UP (continued) 

PRIMING THE IRRIGATION PUMP

 

A

 

B

 

Summary of Contents for GCV12 Series

































Reviews: