Viking F20841 EN, Use & Care Manual

Page: 8 / 24

15 14
In order for your new refrigerator to work properly, it is
important that you understand its various features, controls,
and how to use them.
Power On/Off Switch (Power Interruption Switch)
The power on/off switch is located behind your refrigerator's
top grille. It is used to turn the power off when cleaning the
refrigerator or changing the light bulbs. Your refrigerator
arrives from the factory with the power interruption switch on.
To turn power off, remove the center grille blade. Press the
power on/off switch to the off position.
To turn power on, press power on/off switch to the on
position. Replace the center grille blade.
IMPORTANT: Be sure the power on/off switch is in the on
position after cleaning or changing light bulbs.
Showroom Mode Initiation
Showroom mode allows electronic controls and interior lights
to function independently of refrigeraton system.
To enter the showroom mode: Press and hold ”ACTIVATE
CONTROLS” pad; while holding, press and hold the
“HIGHER” and “ALARM OFF” pads together for 3 seconds.
Three beeps will sound and SHOW will be lit. Showroom
mode is entered.
To exit the showroom mode: press and hold “ACTIVATE
CONTROLS” pad; while holding, press and hold the
“HIGHER” and “ALARM OFF” pads together. Three beeps
will sound and control will revert to normal operation and
display.
P
ro
d
u
ct
C
o
n
tr
o
ls
Power
Switch
Settings and Functions
P
ro
d
u
ct
C
o
n
tr
o
ls
Settings and Functions
Electronic Temperature Settings
Your refrigerator's electronic controls are located behind the
door above the cabinet interior. To activate the electronic
control panel, press “ACTIVATE CONTROLS” pad. All other
pads, except the “ALARM OFF” pad, will remain inactive until
the ”ACTIVATE CONTROLS” pad is pressed. Once activated,
pad remains programmable for at least ten minutes.
When you first plug your new refrigerator in, you will find that
the refrigerator is factory set at 38° F in the refrigerator and 0°
F in the freezer. Wait 24 hours after plug-in for the cabinets to
reach this setting. After 24 hours, you may adjust controls as
desired.
To change from °F to °C, press and hold “ACTIVATE
CONTROLS” then press and hold “ALARM OFF” for 3
seconds. To change back, follow the same steps.
To adjust the refrigerator or freezer temperature, simply press
the ”ACTIVATE CONTROLS” pad, then “REF TEMP” pad or
“FRZ TEMP” pad. Press the “HIGHER” or “LOWER” pad to
adjust temperature setting one degree at a time.
NOTE: Allow 24 hours for temperature to reach desired setting
after any change in set temperature.
Entry Tone
The entry tone is the “beep” you will hear when you press the
control pad. You can deactivate the entry tone by pressing
and holding the ”ACTIVATE CONTROLS” pad for three to
five seconds. You will hear three short beeps to let you know
that the entry tone feature has been deactivated.
To activate the entry tone, simply press and hold the
”ACTIVATE CONTROLS” pad for three to five seconds.
Fast Cool
Fast Cool runs the compressor at high speed for 2 hours to
cool the refrigerator as quickly as possible. After 2 hours, the
refrigerator will return to the previous setting.
To activate fast cool, press ”ACTIVATE CONTROLS” followed
by the “FAST COOL” pad. The fast cool light will be lit.
Max Refrigerator Mode
Max refrigerator mode adjusts the refrigerator temperature to
the coldest setting for four hours, at the end of which the
refrigerator's temperature automatically returns to its previous
setting.
FREEZER
MAX FRZ MAX REF
F
FAST COOL
SAB SHOW
REFRIGERATOR
DOOR OPEN
POWER
HIGH TEMP
C