C. Security Code
(memory location #19)
The security code allows the user/installer to program the
1600A
series phone while DIP switch
3
is in the
ON
(normal)
position. The factory set security code is 845464 (V-I-K-I-N-G). It is recommended that the factory set security code
be changed.
Example:
To store 123456 as the security code:
Enter Your Security Code Here:
#19
Step 1.
Access programming as shown is
Programming
section
A
.
Step 2.
Enter
123456 #19
..
Step 3.
Hang-up.
Note:
The security code must be 6 digits and cannot include a
Q
or a
#
.
B. Quick Programming Features
First emergency speed dial number .........................................................................
Second emergency speed dial number ...................................................................
Third emergency speed dial number .......................................................................
Fourth emergency speed dial number .....................................................................
Fifth emergency speed dial number .........................................................................
Central station receiver number ...............................................................................
Central station voice number ...................................................................................
First “Info” speed dial number (
E-1600A-TP2-EWP
only) ........................................
Second “Info” speed dial number (
E-1600A-TP2-EWP
only) ...................................
Third “Info” speed dial number (
E-1600A-TP2-EWP
only) .......................................
Voice announcer/miscellaneous options (factory set to 000210) .............................
Timing/Dialing options (factory set to 234111) .........................................................
Security code (factory set to 845464) ......................................................................
Identification number (factory cleared) ....................................................................
Second central station identification number (factory cleared) .................................
To add a
Q
at any point in the dialing string ..............................................................
To add a
#
at any point in the dialing string ..............................................................
To add a four second pause at any point in the dialing string ...................................
To switch to pulse dialing at any point in the dialing string ........................................
To clear any speed dial number ...............................................................................
Diagnostic tones (used to check mic and speaker operation) ..................................
Exit programming and disconnect ...........................................................................
Reset all programming to factory default settings ....................................................
Note:
A double beep indicates a valid memory position, four beeps indicate an error.
0-20 digits
0-20 digits
0-20 digits
0-20 digits
0-20 digits
0-20 digits
0-20 digits
0-20 digits
0-20 digits
0-20 digits
6 digits
6 digits
6 digits
0-20 digits
0-20 digits
QQ
Q
#
Q
7
Q
6
(no digits)
Q
0
#7
###
#00
#01
#02
#03
#04
#05
#06
#07
#08
#09
#17
#18
#19
#20
#21
#00 - #09
Enter Digits
then
then
then
then
then
then
then
then
then
then
then
then
then
then
then
then
- then - Enter Memory Location
2. Without the Security Code
Step 1.
Move DIP switch 2 to the
ON
position (sets unit to answer incoming calls, see section
J
).
Step 2.
Move DIP switch 3 to the
OFF
position (incoming calls enter Programming without security code, see section
J
).
Step 3.
From a Touch Tone phone call the line attached to the
1600A Series
phone.
Step 4.
When the
1600A Series
answers, a double beep will be heard and will automatically enter the programming mode.
Step 5.
When finished programming, move DIP switch 3 back to the
ON
position (see section
J
).
5
D. Speed Dial Numbers
The emergency speed dial number programmed in location
#00
is the number that
is dialed when the “
HELP
”
/
”
CALL
” button is first pressed. Additional speed dial
numbers will be dialed when there is no answer or a busy signal is detected and the
next number redial features are activated. To program, enter the desired speed dial
number followed by the location number (
#00 - #04
). To clear a speed dial location,
simply enter the memory location (
#00 - #04
) alone. The
1600A
series phone is
factory set with no speed dial number programmed.
1. Emergency Speed Dial Numbers
(memory locations #00 - #04)
Note:
Up to 20 digits can be stored in each dial position. Special features such as pause, mode change, Touch Tone
Q
and
#
count as single digits.
To Program:
Q
#
4 second pause
switch to pulse mode
0, 1, 2...9
Enter:
Q
#
Q
7
Q
6
0, 1, 2...9
Warning:
Failure to do step 5 above will cause the
1600A Series
to call Viking Technical Support instead of your programmed number.
Note:
If a valid memory position is entered, a double beep will be heard, four beeps indicate an error.