Step 1.
Press the
MODE
button repeatedly until the
REVIEW/CANCEL
indicator lights.
Step 2.
Set dip switch 3 to off to review and/or cancel events in schedule 1
Step 3.
Press one of the
ALERT TONES
buttons (single, double, or triple) repeatedly to rotate
through the event times associated with that alert tone button. A red LED at the bottom
right corner of the time display will light to indicate a buzzer event time (versus a bong
event).
The
CTG-1A
will indicate the end of the programmed events for that
ALERT
TONE
button by displaying three dashes (- - -) before it returns to the first programmed
event.
Note:
Event times are stored in the order of programming, not chronologically.
Step 4.
Press the
-/CANCEL
button to permanently cancel an event tone. A single
acknowledgement tone will be heard. The next consecutive event for that specific alert
tone will then be displayed.
Step 5.
Repeat steps 3 - 5 as needed to remove the events to be cancelled in that schedule.
Step 6.
If you need to review and/or cancel events in schedule 2, set dip switch 3 to on and
repeat steps 3 through 5.
E. Reviewing and/or Cancelling Timed Alert Tones (Dip Switch 2 OFF)
Step 1.
Press the
MODE
button repeatedly until the
EVENTS
indicator lights.
Step 2.
Set dip switch 3 to off to program relay times in schedule 1.
Step 3.
Increase or decrease the event time by pressing the
TIME
(+ or -/
CANCEL
) button until
the desired time is shown for a relay on or off event. Press and hold the + or -/
CANCEL
to speed up the selection.
Step 4.
Press the single
ALERT TONE
button if the displayed time is a relay on event time or
the double or triple
ALERT TONE
buttons if the displayed time is a relay off event time.
Step 5.
Repeat steps 3 and 4 for the remainder of your scheduled relay events in that schedule.
Step 6.
If you need to program timed relay events in schedule 2, set dip switch 3 to on and
repeat steps 3 through 5.
F. Setting Timed Relay Times (Dip Switch 2 ON)
G. Reviewing and/or Cancelling Timed Relay Times (Dip Switch 2 ON)
Step 1.
Press the
MODE
button repeatedly until the
REVIEW/CANCEL
indicator lights.
Step 2.
Set dip switch 3 to off to review and/or cancel events in schedule 1.
Step 3.
Press the single
ALERT TONE
button repeatedly to rotate through the relay on event
times. Press the double or triple
ALERT TONE
buttons repeatedly to rotate through the
relay off event times. The
CTG-1A
will indicate the end of the programmed events for
that
ALERT TONE
button by displaying three dashes (- - -) before it returns to the first
programmed event.
Note:
Event times are stored in the order of programming, not
chronologically.
Step 4.
Press the -/
CANCEL
button to permanently cancel a relay event time. A single
acknowledgement tone will be heard. The next consecutive relay on or off event for that
alert tone button will then be displayed.
Step 5.
Repeat steps 3 and 4 as needed to remove any other relay on or off events in that
schedule.
Step 6.
If you need to review and/or cancel relay on or off events in schedule 2, set dip switch
3 to on and repeat steps 3 through 5.
5
