9
CUSTOM WOOD FRAME INSTALLATION (DFUW Model)
NOTE:
Weight of wood panel must not exceed 20 lbs.
30-3
/4”
(78.1
cm
)
21
-1/
2”
(54
.6
cm
)
23
-7/
8”
(60
.7
cm
)
23-7
/8”
(60.6
cm
)
23-7/8”
(60.6 cm)
23-7
/8”
(60.6
cm
)
34”
(86.4
cm
)
min
.
to
34-3
/4”
(88.3
cm
)
max
.
(wit
h le
velin
g
leg
s fu
lly
exte
nde
d)
SPECIFICATIONS/DIMENSIONS
DESIGNER - 24” W. Models
Basic Electric Data
• 115 VAC/60 Hz
• Maximum amps - 3.3
• Approximate Shipping Weight
Single Zone - 140 lbs. (63.2 kg)
Dual Zone - 170 lbs. (76.5 kg)
Dimensions DFUW 24”W. - Dual Zone
Door Swing DFUW 24”W. - Dual Zone
23-7/8”
(60.6 cm)
90.0°
46-1/2”
(118.1 cm)
21-1/2”
(54.6 cm)
23-11/16”
(60.2 cm)
to front of
locally supplied
custom panel
8
Step 1: Verify door alignment
The door should be parallel to the sides and top of the refrigerator. If alignment is necessary the door may be
adjusted by loosening the 2 screws which secure the hinge adapter brackets to the door and adjusting the door side
to side. Use a 5/32” allen wrench for this procedure. (See Figure 1 below).
Figure 1
9/32”
(7 mm)
Door must be
parallel to top and
sides of refrigerator
Hinge adaptor screws -
Loosen these to adjust
door, on the top and
bottom of the door
Top hinge pin -
Remove to remove
the door
Step 2: Remove door
Remove the top hinge pin from the hinge with an 1/8” allen wrench. Remove the door by angling the top of the door
outward and lifting the door off the bottom hinge. (See detail in Figure 1).
Step 3: Remove gasket
Lay the door on its front being careful not to scratch it. Remove the door gasket by peeling up and out of the channel.
Step 4: Cut overlay panel
Depending on the refrigerator model cut the overlay panel to the dimensions shown. Use Figure 2 and Table A.
Note:
For overlay with lock option, panel thickness to be 3/4” (19 mm) maximum to 5/8” (16 mm) minimum.
Note:
For the door closer to work properly, it is necessary to maintain a minimum space of 9/32” (7mm) between the
door and cabinet flange as shown. This space can be adjusted by adjusting the top and bottom hinge adapters.
