Menu Instruction
：
MAIN DISPLAY DMX MODE
In the upper line of the display,the DMX (DMX 2Ch,3Ch1,3Ch2,4Ch,13Ch,16Ch,29Ch)is display and the
DMX start address is prominently shown in the centre(for example DMX13Ch and ADDRESS 001).As soon
as the DMX signal is interrupted,the display starts flashing
；
if the DMX signal is present again,the display
stops flashing.
MAIN DISPLAY SLAVE MODE
In the upper line the display,the preset DMX is displayed and
“
SALVE
”
is prominently shown in the center.
As soon as the control signal is interrupted, the display starts flashing;if the control signal is present again,
the display stops flashing.
MAIN DISPLAY STANDALONE MODE
In the upper line of display,the preset DMX mode is displayed and the currently activated Auto mode, static
mode STATIC,or colour macro mode COLOUR MACRO.
SETTING THE DMX START ADDRESS(ADDRESS)
Pressing MODE will take you the selection menu for system setting.Using UP and DOWN,select the menu
item
“
ADDRESS
”
(colored background)and confirm with ENTER.This is followed by the display of the menu
item
“
Set DMX Address
”
.Press ENTER again to select the DMX start address as desired button using the
UP and DOWM button. If the start address is changed,the address color changes to red. Confirm with
ENTER and Press MODE twice to return to the main display.The main display is automatically activated if
no input is made within about 30 seconds.
SETTING THE DMX SIGNAL SELECT(DMX SIGNAL SELECT)
Pressing MODE will take you to the selection menu for system settings. Using UP and DOWM,select the
menu item
“
MODE
”
(colored background) and confirm with ENTER. Now use the UP and DOWN buttons
once more to select the
“
DMX SIGNAL SELECT
”
sub-menu item and confirm button pressing ENTER.
Using UP and DOWN, select the desired DMX mode(DMX,Wireless DMX)and confirm with ENTER. Press
MODE twice to return to the main display. the main display is automatically activated if no input id made
within about 30 seconds. You will find tables with the channels of the different DMX Signal in this manual
under DMX SIGNAL CONTROL.
SETTING THE DMX MODE(DMX MODE)
Pressing MODE will take you to the selection menu for system settings. Using UP and DOWM, select the
menu item
“
MODE
”
(colored background) and confirm with ENTER.Now use the UP and DOWN buttons
once more to select the
“
DMX MODE
”
sub-menu item and confirm button pressing ENTER.Using UP and
DOWN,select the desired DMX mode(DMX 2Ch,DMX 3Ch1,DMX 3Ch2,DMX 4Ch,DMX 13Ch,DMX
16Ch,DMX29 Ch)and confirm with ENTER.Press MODE twice to return to the main display.the main
display is automatically activated if no input id made within about 30 seconds.You will find tables with the
channels of the different DMX modes in this manual under DMX CONTROL.
