Operating Instructions
Control board function
Button
Function
Mode
Choose mode or function exit
ENTER
Current show menu or enter into the current selected function
UP
Increase the value
DOWN
Decrease the value
• When the spotlight is properly connected to the mains, “Software Update ,Please Wait” (only
for internal purposes), “Welcome to LED Wash”, the model name and software version appear
successively on the display during the start-up process. After this operation, the spotlight is
ready for use and starts in the mode that was previously selected.
• If one of the DMX operating modes is activated and there is no DMX signal at the DMX input,
the display starts to flash after a few seconds.
• After approximately 30 seconds of inactivity, the display will automatically show the currently
active operating mode.
• Fast Access Feature: In order to simplify the menu guide, the device has an intelligent menu
structure which allows menu and sub-menu items
that were last selected to be accessed directly. 1. Pressing MODE and ENTER simultaneously
will take you directly to the sub-menu item that was last edited and allows you to instantly
change the corresponding value as desired (DMX start address and all operating modes). 2.
Pressing MODE will take you directly to the menu item that was last selected and edited; now
press ENTER to instantly access the sub-menu item that was selected and edited last (DMX
start address and all operating modes).
Menu Map
