Safety Information
！
Strobe lights are known to trigger epileptic seizures in persons who are photosensitive.
This product must be installed by a competent person familiar with the construction and
operation of the product and the hazards involved. Warning notices that strobe lighting will be
used in the performance should be on view at the entrances to the venue
•
Do not open: there are no user-serviceable parts inside.
•
Always ground (earth ) the fixture electrically.
•
Use only a source of AC power that compiles with local building and electrical codes and has
both overload and earth leakage protection.
•
Do not expose the fixture to rain or moisture - it is suitable for indoor or covered use only
！
•
Do not stare directly into the light.
•
Never attempt to bypass the fuse. Always replace defective fuses with ones of the specified type
and rating.
•
Verify that the power feed cable is rated for the current draw of all connected fixtures.
•
Keep all combustible materials (for example fabric, wood, paper) at least 0.5 meters (20 inches)
away from the fixture. Keep flammable materials well away from the fixture.
•
Provide a minimum clearance of 0.1 meters (4 inches) around air vents.
•
Do not modify the fixture or install other than genuine Viking parts.
•
Do not operate the fixture if the ambient air temperature exceeds 40
˚
C (104
˚
F).
•
Caution: Exterior surface temperature after 5 min. operation can reach 40
˚
C (104
˚
F)
WARNING!
This product is for professional use only! It is not for household use
To guard against electric shock
To guard against UV radiation, burn, and fire.
