7
Cabinet Side Trim
(NOTE: “J” Shape)
Cabinet
Side Trim
(“Z” shape)
Anti-Tip
Lag Bolts
NOTE: When leveling each refrigerator
and installing water connections, refer to
installation instructions provided with each
unit.
5. Remove cabinet side trim that is mounted on the right hand side of the unit that is to be installed on the left side
of the installation. Replace this side trim with the connection “J” shaped side trim and shim included in the full
length grille kit.
6. Place 1” (2.5 cm) spacer material on either left or right hand unit as shown on next page. The spacer material
should be located off the bottom of the unit and should not extend the entire height of the unit.
7. Engage the right hand unit’s left side trim into the J-shaped portion of the left side unit’s right side trim.