10
4. Remove cabinet side trim that is mounted on the left hand side of the unit that is to be installed on the right side
of the installation. Replace this side trim with the “Z” shaped side trim and shim included in the full length grille
kit.
5. Remove cabinet side trim that is mounted on the right hand side of the unit that is to be installed on the left side
of the installation. Replace this side trim with the connection “J” shaped side trim and shim included in the full
length grille kit.
6. Place 1” (2.5 cm) spacer material on either left or right hand unit as shown on next page. The spacer material
should be located off the bottom of the unit and should not extend the entire height of the unit.
7. Engage the right hand unit’s left side trim into the J-shaped portion of the left side unit’s right side trim.
Cabinet Side Trim
(“Z” Shape)
Cabinet
Cabinet
Right Hand Door Unit
Left Hand Door Unit
Double 2x4 mounting board fastened to wall at top of cabinet opening
1” (2.5 cm)
spacer
material
NOTE: When leveling each
refrigerator and installing water
connections, refer to installation
instructions provided with each unit.
Cabinet Side Trim
(NOTE: “J” Shape)