
24
Scanning Using Event Utility
(Continued)
Launching Event Utility
Click Event Utility
icon from the system tray to bring up the Event
Utility panel. Or click system Windows
icon then [All apps] to select
Event Utility program.
1.
Click drop-down list to select your scanner and then directly
press a button from the Event Utility panel to start scanning to the
destination with the settings you previously configured.
2.
Alternatively, you can press a button on the Scanner to start
scanning to the destination.
Power Saving
When the scanner has been no operation for 15 minutes, the scanner
will automatically turn off. Event Utility
icon will appear in the system
tray, indicating that the scanner is disconnected. Press the Power
button again to wake up the Event Utility panel.
To turn off the power
saving function, please refer to
NOTE:
When the scanner is disconnected, the Event Utility will
appear
[Can not connect to scanner, check again connection]
message. Make sure your cables are securely connected to the scanner
and the power is turned on in order to wake up the Event Utility panel.
NOTE:
You must install the Event Utility from the supplied DVD-ROM
in order to use the program.