
12
1
Favorite
Settings
Create new scan profiles with your favorite settings
and save them for future use.
2
Original Type Specify an original type including "Photograph",
"Text Document & Lineart", "Magazine".
3
Scan Source
The Scan Source setting is fixed as Flatbed. You
cannot change this setting.
NOTE:
The Scan Source may vary depending on
your scanner type.
4
Scan Mode Specify a mode to scan your originals
including "Color", "Gray", "B/W", "Multi-Color Output".
5
Multi-Color
Output
Tick the checkbox to select the modes including:
“Color”, “Gray”, “B/W”. You can make a single scan
to be saved up to 3 separate images simultaneously.
You can press the “Color”, “Gray”, or “B/W” button to
set different settings for each mode.
6
Scan Size
Specify a paper size including:
•
Flexible
•
A3 (297 x 420mm)
•
A4 (210 x 297mm)
•
B5 (148 x 210mm)
•
A6 (105 x 148mm)
•
B6 (128 x 182mm)
•
Letter (216 x 297mm)
•
Legal (216 x 356mm)
7
Scan
Resolution
Select the resolution of the image to be
scanned with following choices: "100dpi", "200dpi",
"300dpi", "600dpi", "1200dpi", "2400dpi".
NOTE:
The change of Scan Resolution will apply
to the selected cropping frame only.
8
Output
Size
Display the width and height of the cropping frame.
You can adjust the output size by dragging the
edges or corners of the cropping frame in the
Preview Window.
9
Color
Droput
This setting removes a single color (Red, Green or
Blue) such as marks, stamps and retains the black
text. If “None” is selected, No color is dropped out.
Example of removing the red stamp:
You can adjust the Filter Threshold slider when the
color selected cannot drop out. Drag the slider toward
“Maximum” to remove more selected color, and toward
“Minimum” to keep more selected color in.
NOTE:
Color Dropout can only be specified in
“Gray” and “B/W” mode.
Scanning Using ViiScan
(Continued)