10
VIGOR GmbH
•
;
Am Langen Siepen 13-15 • 42857 Remscheid • GERMANY
[
+49 (0) 21 91 / 97 95 •
\
+49 (0) 21 91 / 97 96 00 •
]
^
vigor-equipment.com
2
For your safety
3. Dangers that may arise from
using the device
Before each use, check the
VIGOR tool for full functionality.
Do not use the tool if its functionality cannot be
ensured or if damage is detected. If the tool
is used when it is not in full working order, you
risk severe injuries to persons and damage to
property.
• Do not make any structural changes to the
perforated tool panel plates with power supply.
• Never use tools with a defective on/off switch.
Any tools that cannot be switched on or off with
the On/Off switch are dangerous and must be
repaired.
• All service or repair work must be carried out by
qualified personnel only. Only use original spare
parts so as to guarantee its longterm operatio
nal safety.
• Safety devices and/or cover parts may not be
removed.
• Never use the tool when a protective cover is
missing or when not all of the safety devices are
fitted and in perfect working order.
• For safety reasons any modification of VIGOR
tools is strictly forbidden. Any modification of the
device will result in immediate exclusion from
warranty and liability.
• Keep the perforated tool panel plates with
power supply away from heat sources.
• The perforated tool panel plates with power
supply must not be inserted or removed with
wet hands.
• To unplug from the socket, do not pull the cable,
but always the plug!
• Do not pull the cable over sharp edges or
objects.
• The perforated tool panel plates with power
supply may only be used and installed in con
junction with the VIGOR storage system.
• Avoid mechanical strain.
• Do not place the cable in water.
• Operate the perforated tool panel plates with
power supply only under the approved and
suitable ambient conditions.
• Do not work with the perforated tool panel
plates in a potentially explosive environment.
• Make sure that devices to be plugged in are
switched to OFF beforehand.
• Do not use the perforated tool panel plates with
power supply if you are under the influence of
medication, alcohol or drugs.
• Do not cover the perforated tool panel plates
with power supply. There is a risk of fire due to
heat accumulation.
• The perforated tool panel plates with power
supply are no toys. Keep them away from
children.
• Follow the instructions on the type plate. Do not
remove the type plate.
• Do not put them one behind the other! Do not
operate covered!
Elektrische Energien können schwere Verletzungen verursachen!
Electrical energy may cause serious injuries!
