Vigor V6000-015SP, Operating Instructions Manual

Page: 9 / 12

9
VIGOR GmbH
•
;
Am Langen Siepen 13-15 • 42857 Remscheid • GERMANY
[
+49 (0) 21 91 / 97 95 •
\
+49 (0) 21 91 / 97 96 00 •
]
info@vigor-equipment.com •
^
vigor-equipment.com
2 For your safety
2. Intended use
Operational reliability is only guaranteed if the
device is used as intended in accordance
with the information provided in the operating
instructions. In addition to the safety advice in
these operating instructions, the general safe­
ty regulations, accident prevention regulati­
ons and environmental protection regulations
valid for this device's application range must
be observed and respected. Use and mainte­
nance must always comply with relevant local
and national regulations. Please make sure
that any person using this device or carrying
out any maintenance work carefully reads
these operating instructions and fully under­
stands all the provided information before
using the device.
• Any deviation from the intended use and/or
any misapplication of the devices is not per­
mitted and will be considered as improper use.
• Any claims against the manufacturer and/or its
authorised agents because of damage caused
by improper use of the devices are void.
• Any personal injury or material losses caused by
improper use of the tool are the sole responsibi­
lity of the owner.
• The VIGOR perforated tool panel plates with
power supply may only be used or installed in
conjunction with storage system V6000.
1. Owner's liability
• This device was developed and manufac­
tured according to the technical norms and
standards valid at the time and is considered
to be operationally reliable. Nevertheless,
the device may present a danger when it is
not used as intended or used in an inappro­
priate way by non­qualified personnel.
• Please make sure that any person using this
device or carrying out any maintenance
work carefully reads these operating instruc­
tions and fully understands all the provided
information before using the device.
• Modifications of any kind or any additions or
modifications to the device are prohibited.
• All safety, warning and operating informa­
tion on the device must be kept legible.
Immediately replace any damaged labels
or stickers.
• All specified installation values or setting
ranges must be observed.
• Always keep the operating instructions close
to the tool.
• The tool may only be used if it is in good
working order.
• All safety equipment must always be within
reach and should be checked regularly.
Elektrische Energien können schwere Verletzungen verursachen!
Electrical energy may cause serious injuries!