EN
20
Electric energy may cause serious injuries to persons!
Always wear personal protective equipment!
can cause serious damage to the unit and
workpieces, and even the electrical supply
when being operated.
•
Take care to maintain a safe, balanced po-
sition when working.
Always maintain a
safe and balanced position during operation
so that the unit is under control even in unex-
pected situations.
•
Do not use the unit in rooms at risk of ex-
plosions.
Electric tools can cause sparks or
ignite combustible materials. Never use tools
in proximity with combustible substances like
benzene, naphtha, detergents, etc. Work in
well-cleaned and well-ventilated areas only.
Keep combustible materials out of the work
area.
•
Do not point the device at another per-
son.
Keep children and other persons out of
the work area when operating the tool.
•
Never operate the unit unloaded or with-
out a coil.
•
The induction heater must be switched
off before changing accessories and the
coils!
4. Safety rules for induction heater
Always have a functional fire extinguisher ready
when using the VIGOR induction heater.
Never exceed the work cycle of 2 minutes of heat-
ing (switched on) and 2 minutes of cooling
(switched off). The induction heater has a guard
against overloading, however the heating coils do
not and they may therefore be damaged.
•
Only use parts and accessories that are
recommended by the manufacturer.
•
Never carry the tool with your finger on
the control button.
•
Avoid unintentional operation.
•
Always keep the unit dry, clean and free
of grease or oil.
•
Never use the tool whilst under the influ-
ence of alcohol or drugs.
•
Repair work must be carried out exclu-
sively by authorised qualified personnel.
•
When working on elevated places, always
make sure that no one is located below the
work area before you commence work.
Safety rules for protecting people:
People with a pacemaker or other
electronic surgical implant made of
metal must not work with the in-
duction heater and must maintain
a safe distance of at least 1 m.
During the work do not wear any
metal objects, such as jewellery,
rings, watches, chains, ID tags,
belt buckles, piercings and cloth-
ing with metal parts, such as metal
studs, buttons and zips etc. - The
induction heater can heat up metal
objects very quickly and cause se-
vere burns or can set clothing on
fire.
EN
20
20
Electric energy may cause serious injuries to persons!
Always wear personal protective equipment!
can cause serious damage to the unit and
workpieces, and even the electrical supply
when being operated.
•
Take care to maintain a safe, balanced po-
sition when working.
Always maintain a
safe and balanced position during operation
so that the unit is under control even in unex-
pected situations.
•
Do not use the unit in rooms at risk of ex-
plosions.
Electric tools can cause sparks or
ignite combustible materials. Never use tools
in proximity with combustible substances like
benzene, naphtha, detergents, etc. Work in
well-cleaned and well-ventilated areas only.
Keep combustible materials out of the work
area.
•
Do not point the device at another per-
son.
Keep children and other persons out of
the work area when operating the tool.
•
Never operate the unit unloaded or with-
out a coil.
•
The induction heater must be switched
off before changing accessories and the
coils!
4. Safety rules for induction heater
Always have a functional fire extinguisher ready
when using the VIGOR induction heater.
Never exceed the work cycle of 2 minutes of heat-
ing (switched on) and 2 minutes of cooling
(switched off). The induction heater has a guard
against overloading, however the heating coils do
not and they may therefore be damaged.
•
Only use parts and accessories that are
recommended by the manufacturer.
•
Never carry the tool with your finger on
the control button.
•
Avoid unintentional operation.
•
Always keep the unit dry, clean and free
of grease or oil.
•
Never use the tool whilst under the influ-
ence of alcohol or drugs.
•
Repair work must be carried out exclu-
sively by authorised qualified personnel.
•
When working on elevated places, always
make sure that no one is located below the
work area before you commence work.
Safety rules for protecting people:
People with a pacemaker or other
electronic surgical implant made of
metal must not work with the in-
duction heater and must maintain
a safe distance of at least 1 m.
During the work do not wear any
metal objects, such as jewellery,
rings, watches, chains, ID tags,
belt buckles, piercings and cloth-
ing with metal parts, such as metal
studs, buttons and zips etc. - The
induction heater can heat up metal
objects very quickly and cause se-
vere burns or can set clothing on
fire.
Summary of Contents for V4891
Page 31: ...Notizen Notes Notizen Notes...