GOOD & PASS
××.××V ×××× SAE
GOOD & RECHARGE
××.××V ×××× SAE
RECHARGE & RETEST
××.××V ×××× SAE
BAD & REPLACE
××.××V ×××× SAE
BAD CELL & REPLACE
××.××V ×××× SAE
LOAD ERROR
13.
When the test is completed, the display shows the actual
volts and the actual CCA or %. Press the
◄
►
key to select:
SOH (STATE OF HEALTH) or SOC (STATE OF CHARGE).
13.
When the test is completed, the display shows the actual
volts and the actual CCA or %. Press the
◄
►
key to select:
SOH (STATE OF HEALTH) or SOC (STATE OF CHARGE).
One of six results will be displayed:
One of six results will be displayed:
GOOD & PASS:
GOOD & PASS:
The battery is good and
capable of holding a charge.
GOOD & RECHARGE:
The battery is good but needs
to be recharged.
RECHARGE & RETEST:
Battery is discharged, the
battery condition cannot be
determined until it is fully
charged. Recharge and retest the battery.
BAD & REPLACE:
The battery will not hold a
charge. It should be replaced
immediately.
BAD CELL & REPLACE:
The battery has at least one
cell short circuit. It should be
replaced immediately.
LOAD ERROR :
The tested battery is bigger
than 2000CCA or 200AH or
the clamps are not connected
properly. Please fully charge the battery and retest after
excluding both previous reasons. If reading is the same, the
battery should be replaced immediately.
14.
Press the
◄
►
key to select result printing: YES or NO.
23
PRINT RESULT?
◄►
↵
YES
Summary of Contents for V1922
Page 5: ...5...
