MODEL VG06061
6
B. INSTALLING THE SIDE GLASS PANEL
1. Arrange the glass panel to the preferred configuration (see diagram on pg. 3).
2. Select the door opening location on the shower cabin.
3. Install the side seal strip (#6) to the wall side of the hinged side glass panel (#4). [SEE
FIG.3]
4. Screw the glass support (#7) to the side glass panel using the hex key (supplied). Use a
washer on each side of the side glass panel.
5. Place the side glass panel on the bottom rail (#9). Use the level to accurately position
the panel.
6. Mark holes on the wall for the mounting screws.
7. Remove the side glass panel. Drill holes into respective marks and insert plastic
anchors (#19) inside them.
8. Place the side glass panel back onto the bottom rail and screw it to the wall with 2”
screws (#17).
9. Repeat Steps 1 through 8 for the unhinged side glass panel (#5).
Summary of Contents for VG06061
Page 3: ...MODEL VG06061 3 ...
