C. INSTALLING THE DOOR
1.
Remove the rollers (#3) from the box,
note that these are fully installed.
Carefully unthread the cap with a small
head allen key. You will see a big hex
screw, this is referred to as the roller
height adjustment screw.
2.
Use the provided allen key to unscrew
the adjustment screw and dismantle
the roller. Place the screw through
door panel top holes and attach the
two top rollers onto the door panel
(#5).
ROLLER (3)
SMALL HEX
HOLE
3/8" VARIANCE
ROLLER HEIGHT
ADJUSTMENT
SCREW
ROLLER HEIGHT
ADJUSTMENT
SCREW
OUTSIDE OF
THE SHOWER
ROLLER (3)
SMALL HEX
HOLE
ROLLER HEIGHT
ADJUSTMENT
SCREW
C1
C2
12
MODEL VG06041
B9
11
4
9. Check that the structural rail is level. I f it is
not level and the rail is not at the correct
height, then remove the rail and use the
built-in adjustments in the plates to modify
as needed.
