Vig430P Motherboard Manual
72
Wait For 'F1' If Error
This forces the system to wait until the 'F1' key is pressed if an error occurs. The options are
Disabled and
Enabled
.
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function. When this item is set
to Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt 19 at boot and allow
the drives that are attached to these host adaptors to function as bootable disks. If this item
is set to Disabled, the ROM BIOS of the host adaptors will not capture Interrupt 19, and the
drives attached to these adaptors will not function as bootable devices. The options are
Enabled
and Disabled.
Power Configuration
Watch Dog Function
If enabled, the Watch Dog Timer will allow the system to reboot when it is inactive for more
than 5 minutes. The options are Enabled and
Disabled.
Power Button Function
If set to Instant_Off, the system will power off immediately as soon as the user hits the power
button. If set to 4_Second_Override, the system will power off when the user presses the
power button for 4 seconds or longer. The options are
Instant_Off
and 4_Second_Override.
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Power-Off for the system
power to remain off after a power loss. Select Power-On for the system power to be turned
on after a power loss. Select Last State to allow the system to resume its last state before a
power loss. The options are Power-On, Power-Off and
Last State
.
CPU Configuration
This submenu displays the information of the CPU as detected by the BIOS. It also allows the
user to configure CPU settings.
Socket 1/Socket 2 CPU Information
This submenu displays the following information regarding the CPU installed in Socket 1 and
(or) Socket 2 as detected by the BIOS:
o
Type of CPU
o
CPU Signature
o
Microcode Patch
o
CPU Stepping
o
Maximum CPU Speed
o
Minimum CPU Speed
o
Processor Cores
o
Intel HT (Hyper-Threading) Technology
