Vig430P Motherboard Manual
20
Overview of Jumper Settings
The Vig430P Motherboard contains the latest technology to offer an almost jumper less
configuration. All
Xeon CPU’s are automatically detected and the Speed is automatically set
from the information provided by the CPU.
CAUTION!!
1. Never remove jumpers using large pliers as this can damage the pins. The best way
to remove a jumper is to use a small pair of tweezers or fine needle-nosed pliers.
2. Do not move the jumper with the power on. Always turn off the power and unplug the
power cord from the computer before changing a jumper, taking all necessary anti
static precautions
System Board Jumper Settings
The following figure shows the jumper locations of the Motherboard. Please refer to the
following tables describing ea
ch jumper’s configuration.
Explanation of Jumpers
To modify the operation of the Motherboard, jumpers can be used to choose between optional
settings. Jumpers create shorts between two pins to change the function of the connector. Pin 1
is identified with a square solder pad on the printed circuit board.
Note
:
On two pin jumpers, “Closed” means the jumper is on and “Open” means the jumper is off
the pins.
Figure 3:
Explanation of jumpers