Vig430P Motherboard Manual
18
Chapter 2: System Board Options
The Vig430P Motherboard is capable of accepting Duo Xeon E5-2400 (SandyBridge)
processors. RAM can be upgraded to a maximum of 192GB using DDR3 Registered
ECC or Unbuffered ECC/Non-ECC 1600/1333/1066/800 MHz Memory
WARNING!
Unplug the system before carrying out the procedures described in this chapter.
Failure to disconnect power before you open the system can result in personal injury or
equipment damage. Hazardous voltage, current, and energy levels are present in this
product. Power switch terminals can have hazardous Voltages present even when the
power switch is off.
The procedures assume familiarity with the general terminology associated with
personal computers and with the safety practices and regulatory compliance required
for using and modifying electronic equipment.
Do not operate the system with the cover removed. Always replace the cover before
turning on the system.
As the colours of the wires in the mains lead of this computer may not correspond with the coloured
markings identifying the terminals in your plug precede as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is
marked by the letter
E
or by the safety Earth symbol
or coloured green or green-and-yellow.
The wire which is coloured blue must be connected to the terminal which is marked with the letter
N
or
coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter
L
or coloured red.
CAUTION!
The Viglen Vig430P Motherboard
and associated components are
sensitive electronic devices. A small
static shock from your body can
cause expensive damage to your
equipment.
