Viglen Dossier XR, User Manual

Page: 99 / 160

Upgrading The Computer
Upgrading the Hard Disk Drive 6 - 5
6
Upgrading the Hard Disk Drive
The hard disk drive can be taken out to accommodate other 2.5" parallel (PA-
TA) hard disk drives with a height of 9.5mm (h) (see
“Storage” on page C -
3 ). Follow your operating system’s installation instructions, and install all
necessary drivers and utilities (as outlined in “Driver Installation” on page 4
- 5 ), when setting up a new hard disk.
1. Turn off the computer, and turn it over and remove the battery.
2. Locate the hard disk bay cover and remove screws Model A OR screws
- Model B .
HDD System
Warning
New HDD’s are blank.
Before you begin make
sure:
You have backed up any
data you want to keep
from your old HDD.
You have all the CD-
ROMs and FDDs re-
quired to install your oper-
ating system and
programs.
If you have access to the
internet, download the lat-
est application and hard-
ware driver updates for
the operating system you
plan to install. Copy these
to a removable medium.
Figure 6 - 4
Hard Disk Bay &
Screws
1
2 3
3 2
1
Model A
Model B