str
19
str
19
WARNING!
• Do not place any part of this appliance in a dishwasher.
• Danger of injury! Handle the blade (1) with care as it is very sharp!
• Place the appliance on a dry, flat, and steady surface.
• Apply downward pressure onto the appliance so that the suction feet (6) get a good grip.
PREPARATION FOR OPERATION
Before plugging in the appliance, make sure:
• The electrical circuit is not overloaded with other appliances.
• The blade (1) is properly engaged and tightened.
• The on/off switch (2) is set to 0 (off position).
• The thickness knob (11) is set to 0.
Do not slice:
• Hardly frozen foods
• Meat with bones
• Food containing large stones or seeds
• Food in wrappers such as aluminium foil or plastic film
OPERATION
Place the slicer on a flat, dry and stable surface.
• Place the slicer on a flat, dry and stable surface.
• Place the feeder on the guide plate. Make sure that you move the sliding plate so that you can move
it freely forward and backward.
• For easy handling with the sliding plate, the manufacturer recommends lubricating the friction
surfaces with cooking oil.
• Place the food feeder with the finger guard on the sliding plate.
• Place the food on the feeder (8). Then place the food holder (14) on the stop (10) and set it until the
food is held firmly in place.
• Place a tray (9) behind the blade (1) to catch sliced food.
• Adjust the thickness of the slices (11) to the desired thickness (0 - 20 mm).
Getting started:
• Connect the power plug (5) to a suitable electrical outlet.
• Set the on/off switch (2) to I (on position) to switch on the appliance. The blade (1) starts running.
• Grasp the food holder (14) with your right hand while keeping your thumb protected behind the
food guide (10). Apply even pressure for best slicing results.
• Slide the food guide (10) towards the blade (1). Move back and forth steadily with even pressure.
Repeat for additional slices.
• After use, set the on/off switch (2) to 0 (off position) and the thickness knob (11) to 0.
• Allow the blade (1) to stop running completely. Unplug the appliance afterwards.
WARNING!
• Do not operate this appliance without the food guide (10) and food holder (14) in place.
• Do not operate the appliance continuously for more than 7 minutes. Allow the appliance to cool
down for 30 minutes before operating it again.
