VZ-WM60
Installation Instructions
Visit the ViewZ website at http://www.viewzusa.com
Page 9
Universal Spacers Installation
The universal spacer may be stacked six (6) high, for a total stacking height of 1-1/2”. The universal spacers must be stacked in the
direction shown above. The universal spacers must be placed between the mounting bracket and the flat panel.
The universal spacer can fit M4, M5, M6 and M8 screws sizes.
You may not need to use any spacers for your
particular flat panel.
The universal washer will fit M4, M5 M6 and M8 hole patterns that your flat panel requires.
EXAMPLE:
If your flat panel uses M8 screws, use the M8 mounting points.
Universal Washer Installation
Pre-install the mounting screws, spacers and washers. Once mounted, push down to eliminate movement from the bracket. Then
proceed to tighten the rest of the hardware. Repeat this process for the installation of the remaining mounting bracket.
M8
M5, M6
M4
Phillips Head Screwdriver
