background image

VZ-WM60

Installation Instructions 

Visit the ViewZ website at http://www.viewzusa.com

 

Page 13

VIEWZ

LIMITED LIFETIME WARRANTY

What and Who is Covered by this Limited Warranty and for How Long

Viewz warrants this product to be free from defects in material and workmanship for the lifetime of the original 

owner of this product.  The limited warranty is valid only for the original purchaser of the product.

What ViewZ Will Do

At the sole option of ViewZ, ViewZ will repair or replace any product or product part that is defective.  If 

ViewZ chooses to replace a defective product or part, a replacement product or part will be shipped to you at no 

charge, but you must pay any labor costs. 

What is Not Covered; Limitations

VIEWZ DISCLAIMS ANY LIABILITY FOR DAMAGE TO MOUNTS, ADAPTERS, DISPLAYS, PROJEC-

TORS, OTHER PROPERTY, OR PERSONAL INJURY RESULTING, IN WHOLE OR IN PART, FROM 

IMPROPER INSTALLATION, MODIFICATION, USE OR MISUSE OF ITS PRODUCTS. 

VIEWZ DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES 

OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  VIEWZ IS NOT RESPON-

SIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO, 

INABILITY TO USE ITS PRODUCTS OR LABOR COSTS FOR REMOVING AND REPLACING DEFEC-

TIVE PRODUCTS OR PARTS.  SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF 

INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY 

NOT APPLY TO YOU.  

What Customers Must Do for Limited Warranty Service

If you discover a problem that you think may be covered by the warranty you MUST REPORT it in writing to 

the address below within thirty (30) days.  Proof of purchase (an original sales receipt) from the original con-

sumer purchaser must accompany all warranty claims.  Warranty claims must also include a description of the 

problem, the purchaser’s name, address, and telephone number.  General inquiries can be addressed to ViewZ 

Customer Service at 1-888-99-ViewZ.  Warranty claims will not be accepted over the phone or by fax.

 

ViewZ

 

Attn: Warranty Claim

  

177 W. Orangethorpe Ave.

  

Placentia, CA  92870

How State Law Applies

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER 

RIGHTS WHICH VARY FROM STATE TO STATE.

©ViewZ 2011

Warranty

Disclaimer

ViewZ intends to make this manual accurate and complete. However, ViewZ makes no claim that the information 

contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in 

connection with the installation or use of this product. The information contained in this document is subject to change 

without notice or obligation of any kind. ViewZ makes no representation of warranty, expressed or implied, regarding 

information contained in this document.

Summary of Contents for VZ-WM60














Reviews: