4
Installation Instructions
Visit the ViewZ USA website at http://www.viewzusa.com
VZ-DC24-320 Power Supply
Use #12 Screws or Bolts that are at least 1.25” in length
Mounting
Drill pilot holes
1.
Use the hole pattern provided to mark where the mounting screws will be located.
2.
Drill in mounting screws ¼” away from wall. (Pilot holes might be needed).
3.
If not drilling to a stud, use proper fastener/support (e.g. drywall anchor).
4.
Place the Power Supply Box Keyholes over the mounting screws.
5.
Secure the Power Supply by tightening screws.
If mounting to wall studs or ceiling studs, make sure that the mounting screws are anchored into the center of the wall studs or ceiling studs. Use
of an edge-to-edge stud finder is recommended.
Screw Bolts (Qty 4)
