ViewSonic VX912 Service Manual Download Page 28

Page: 28 / 79

Panel Power Sequencing ( PANEL_PW12,3) ( Pin 16, 18) : The MTV312 has two dedicated outputs

VDDCTRL1 and 2 ( Pin32 and Pin3) to control LCD power sequencing once data and control signals

are stable.

Panel interface (Pin73~94) : The RTD2523 driver interface is highly programmable. It supports dual bus /

dual port for SXGA drivers.

6.1.2 Power Regulator AIC1563 (U2),AIC1117CY(U1,U3) : The AIC1563 is a monolithic control IC containing

the primary functions required for DC to DC converters. The device consists of an internal temperature

compensated reference, comparator, controlled duty cycle.

Oscillator with an active current sense circuit. Desired output voltage are determined by the equation,

Volt = 1.25 ( 1 + R11 / R12), In this case, the output voltage are 5Volts

The AIC1563 is a low dropout positive adjustable regulator with minimum of 1A output current capability.

So it is well suited for 3.3 V and 2.5 V Regulator

6.1.3 Power Regulator AIC1117CY (U1,U3) : The AIC1117CY is a monolithic control IC containing the

primary functions required for DC to DC converters. The device consists of an internal temperature

compensated reference, comparator, controlled duty cycle.

Oscillator with an active current sense circuit. Desired output voltage are determined by the equation,

Volt = 1.25 ( 1 + R17 / R15), In this case, the output voltage are 2.5 Volts for panel power.

6.2 Power (Inverter) Board

This is a specific power (inverter) power board for VE710 monitor 40W 12V 3.5A output power and backlight

which converters 12 Vdc to drive four cold cathode fluorescence tubes.

6.2.1 Inverter Electrical specification described as below.

Rated Input Voltage

12Vdc

Input Voltage Range

11.4 ~ 12.6 Vdc

Input Current

<2A

Input

On / Off control Voltage

2~3.3 for on , 0~1 for off

Rated Output Strike-on Voltage

1500Vrms

Rated Output Voltage

710Vrms at 7mA

Rate Output Frequency

40~50KHz

Output

Rated Ourput Current

7~8 mA

6.2.2 Power

This is a general purpose AC / DC adapter which converter 90~240 Vac to a stabilized DC voltage 12 V with

rated output current of 4.16A . Electrical specification described as below.

Rated Input Voltage

90~240 Vac , 50 / 60Hz

Operation Input Voltage

90~260 Vac , 47 ~ 63Hz

Input Current

<1.5A

Inrush Current

<100A@120Vac

Standby Input Voltage

12Vdc

Output Voltage Regulation

+/-5%

Output Ripple & Noise

120mVp-p

Rate Output Current

<3.5A

Turn-on delay

<3secs

ViewSonic

Corporation

nfidential

Not

Copy

VX912

Summary of Contents for VX912
















































































Search results

Summary of Contents for VX912

Reviews:

Related manuals for VX912

Brands by name

Popular brands

ViewSonic VX912, Service Manual

Search results

Summary of Contents for VX912

Reviews:

Related manuals for VX912

Brands by name

Popular brands