ViewSonic VX912 Service Manual Download Page 14

Page: 14 / 79

Main Menu Controls

Adjust the menu items shown below by using the up

▲

and down

▼

buttons.

Control

Explanation

Auto Image Adjust

automatically sizes, centers, and fine tunes

the video signal to eliminate waviness and distortion.
Press the [2] button to obtain a sharper image.

If this function does not work on your LCD display, then

lower the video refresh rate to 60 Hz and set the resolution

to its

Contrast

adjusts the difference between the image background

(black level) and the foreground (white level).

Brightness

adjusts background black level of the screen image.

Input Select

allows you to toggle between an analog and a

digital signal.

pre-set value.

functions are not available for DVI input.

NOTE:

1. Auto Image Adjust works with most common video cards.

2. The Auto Image Adjust and most Manual Image

Adjust

ViewSonic

Corporation

nfidential

Not

Copy

VX912

Summary of Contents for VX912
















































































Search results

Summary of Contents for VX912

Reviews:

Related manuals for VX912

Brands by name

Popular brands

ViewSonic VX912, Service Manual

Search results

Summary of Contents for VX912

Reviews:

Related manuals for VX912

Brands by name

Popular brands