ViewSonic VS14652-1M, User Manual

Page: 23 / 55

Using the TV Features
14
Operation
Turning the TV On and Off
Press
on the remote control.
You can also use the key on the front side of the panel.
j
If there is no input signal within 10 minutes, TV will be turned off automatically.
Initial Setup
When first turning the TV on, there is no channel stored in the memory and the display shows “No Signal”.
To scan for available channels:
1. Press
MENU
to display the OSD main menu.
2. Press ◄ or ► to select CHANNEL menu, then press ENTER to enter
the menu.
3. Press ▲ or ▼ to select Signal Type , and use ◄ or ► to select the
antenna connection to Air or Cable .
4. Press ▲ or ▼ to select
Auto Channel Search
, then press
ENTER
to
enter to perform channel scan.
5. The channel scan may take a while to complete, and after it is done, the
screen will return to the first found channel.
To stop scanning, press MENU at any time.
SOURCE
POWER
1 2 3
CHANNEL CHANNEL
Channel List
Favorite List
Channel Settings
Signal Type Air
Auto Channel Search
DTV Signal 0%
:Return :Move
MENU MENU
Execute
:Press to Execute
ENTER ENTER
AUTO CHANNEL SEARCH - Air AUTO CHANNEL SEARCH - Air
:Stop Auto Channel Search
ENTER ENTER
:Skip
MENU MENU
Now Searching... Please Wait...
Return
Analog Channels Found: 2
Digital Channels Found: 0
1%
CHANNEL CHANNEL
Channel List
Favorite List
Channel Settings
Signal Type Air
Auto Channel Search
DTV Signal 0%
:Return :Move
MENU MENU
Execute
:Change Setting