ViewSonic
Wireless Media Adapter
30
Auto-Sync Feature
Auto-Sync automatically synchronizes your WMA100 with your router or
gateway. With the
Auto-Sync
button highlighted on the
Setup
menu
(shown to the right), press
OK
on the Remote Control.
•
If you see the message
Auto Sync was successful
, configuration is now
complete. You are now ready to start using your WMA100!
•
If the SSID Discovery Screen displays (shown to the right), the
WMA100 has recognized more than one network.
Use the
Up/Down Arrow
buttons to select your SSID (network name),
then press
OK
.
If you select an SSID that
does not
have a WEP or WPA key,
configuration is now complete. You are ready to start using your
WMA100!
•
If you select an SSID that
does
have a WEP or WPA key, the
Wi-Fi
Setup Screen
(shown to the right) will automatically display.
1
Use the
Down Arrow
button to select either “
WEP Enabled
” or
“
WPA-PSK Enabled
,” then press
OK
.
2
Complete the remaining fields according to the settings of your
router/gateway, select
Save
, then press
OK
.
Wi-Fi configuration is now complete!
Setup Main Menu with
Auto-Sync pre-selected
SSID Discovery Screen
WMA_UG.book Page 30 Tuesday, October 12, 2004 3:29 PM