PAC01 Z-Wave JEM-A Adapter
Introduction
PAC01 is a security enabled wireless JEM-A Adapter, based on Z-Wave Plus technol-
ogy. Z-Wave Plus
TM
enabled devices displaying the Z-Wave Plus
TM
logo can also be
used with it regardless of the manufacturer, and can also be used in other manufac-
turer’s Z-Wave
TM
enabled networks. Z-Wave controller can On/Off the thermostat by
sending Thermostat Setback command.
PAC01 is a transceiver which is a security enabled device which based on
Z-Wave Plus technology, and it is fully compatible with any Z-Wave
TM
enabled
network. Since PAC01 supports Security Command Class, it can learn with a Se-
cured enabled controller to fully utilize the device. Its functionality and supported
command classes is identical when included as a secure and non-secure device.
Safety Precautions and Installation
Avoid installing the unit in storming or raining weather.
Be sure to isolate or switch off power source before installing or maintenance.
Do ensure that the power supply circuit protected by a 16A circuit breaker or
suitable equivalent fuse.
IMPORTANT
Installation must be performed by skilled technicians who are informed about the
standards and technical requirements of the appliance and its proper
installation.
Check your local codes as they apply to your situation. If the house wiring is of
aluminum, consult with an electrician about proper wiring methods.
Before proceeding with the installation, TURN OFF THE POWER TO THE LIGHTING
CIRCUIT AT THE CIRCUIT BREAKER OR FUSE BOX TO AVOID ELECTRICAL
SHOCK.
Specification
Rated Voltage
220-240Vac 50Hz/60Hz 0.02A (EU)
100Vac 50/60Hz 0.02A (JP)
120Vac 60Hz 0.02A (US)
Operating Temperature 0°C to 40°C (Humidity 85% max.)
Frequency Range
868.40MHz & 869.85MHz / EU (PAC01-EU);
1
