ViewSonic
VE170m/VE170mb
5
Using the
LCD display
Setting the Timing Mode
Setting the timing mode is important for maximizing the quality of the screen
image and minimizing eye strain. The
timing mode
consists of the
resolution
(example 1280 x 1024) and
refresh rate
(or vertical frequency – example 60
Hz). After setting the timing mode, use the OnView
®
controls (pages 8 - 10) to
adjust the screen image.
For best picture quality set the
LCD display
timing mode to:
VESA
®
1280 x 1024 @ 60 Hz
To set the Timing Mode:
1
Set the resolution: Right-click on the Windows
®
desktop >
Properties
>
Settings
> Desktop Area or Screen Area for Windows 98 and newer > set
the resolution.
2
Set the refresh rate: See the user guide for your computer's graphics card.
WARNING:
Do not set the graphics card in your computer to exceed the
maximum refresh rate of 75Hz; doing so may result in permanent damage to
your
LCD display
.
OSD and Power Lock Settings
•
OSD Lock:
Press and hold [1] and the up arrow
for 10 seconds. If any
buttons are pressed the message
OSD Locked
will display for 5 seconds.
•
OSD Unlock:
Press and hold [1] and the up arrow
again for 10 seconds.
•
Power Button Lock:
Press and hold [1] and the down arrow
for 10
seconds. If the power button is pressed the message
Power Button Locked
will display for 5 seconds. With or without this setting, after a power failure,
your
LCD display
’s power will automatically turn on when power is restored.
•
Power Button Unlock:
Press and hold [1] and the down arrow
again for
10 seconds.
Summary of Contents for VE170m
Page 19: ...ViewSonic Corporation ...