![background image](http://html1.mh-extra.com/html/viewsonic/va1721wmb-17-lcd-monitor/va1721wmb-17-lcd-monitor_service-manual_1020659025.webp)
- 25 –
ViewSonic Corporation
Confidential - Do Not Cop
VA1721wmb
(4)
、
Adjust the RED of color3 on factory window until CA-210 indicator reached the
value R=100
(5)
、
Adjust the GREEN of color3 on factory window until CA-210 indicator reached the
value G=100
(6)
、
Adjust the BLUE of color3 on factory window until CA-210 indicator reached the
value B=100
(7)
、
Repeat above procedure ( item 4,5,6) until CA-210 RGB value meet the
tolerance =100
±
5
D
、
Adjust 5400 color-temperature
(1) Switch the CA-210 to
RGB-Mode
(with press “MODE” button )
(2)
、
Switch the MEM .channel to Channel 1( with up or down arrow on CA-210 )
(3)
、
The LCD-indicator on CA-210 will show x=0.335
±
0.03, y=0.350
±
0.03, Y
≥
190 cd/m
2
(4)
、
Adjust the RED of color3 on factory window until CA-210 indicator reached the
value R=100
(5)
、
Adjust the GREEN of color3 on factory window until CA-210 indicator reached the
value G=100
(6)
、
Adjust the BLUE of color3 on factory window until CA-210 indicator reached the
value B=100
(7)
、
Repeat above procedure ( item 4,5,6) until CA-210 RGB value meet the
tolerance =100
±
5
E
、
Adjust SRGB color-temperature
(1)
、
Switch the CA-210 to
RGB-Mode
(with press “MODE” button )
(2)
、
Switch the MEM .channel to Channel 1 ( with up or down arrow on CA-210 )
(3)
、
The LCD-indicator on CA-210 will show x=0.313
±
0.03, y=0.329
±
0.03, Y
≥
190 cd/m
2
(4)
、
Adjust the RED of color3 on factory window until CA-210 indicator reached the
value R=100
(5)
、
Adjust the GREEN of color3 on factory window until CA-210 indicator reached the
value G=100
(6)
、
Adjust the BLUE of color3 on factory window until CA-210 indicator reached the
value B=100
(7)
、
Repeat above procedure ( item 4,5,6) until CA-210 RGB value meet the tolerance
=100
±
5
F
、
Press reset key and Turn the Power-button “off to on” to quit from factory mode.
2. Geometry
1).Set cross-hatch pattern and preset timing as timing table listed.
2).Change to each mode in turn and wait for the monitor finish auto-alignment and save
press before change to next mode.
3).Until all of modes are adjusted, exit OSD menu and press POWER OFF to exit factory
mode.
Summary of Contents for VA1721wmb - 17" LCD Monitor
