ViewSonic Pro8400 Series VS13647 User Manual Download

Page: 20 / 78

ViewSonic

Pro8400

Remote Control Operation

Point the remote control at the infrared remote sensor and press a button.

Operating the projector from

the front

Operating the projector from

the rear

HDMI1

HDMI2

Compo

Video

Swap

Default

Auto

Enter

HDMI1

HDMI2

Compo

Video

Swap

Default

Auto

Enter

Do not point the laser directly to the people's eyes (especially small children).
There is a danger of injury to the eyes.

The remote control may not operate when there is sunlight or other strong
light such as a fluorescent lamp shining on the remote sensor.

Operate the remote control from a position where the remote sensor is visible.

Do not drop the remote control or jolt it.

Keep the remote control out of locations with excessively high temperature or
humidity.

Do not get water on the remote control or place wet objects on it.

Do not disassemble the remote control.

Summary of Contents for Pro8400 Series VS13647















































































Search results

Summary of Contents for Pro8400 Series VS13647

Reviews:

Related manuals for Pro8400 Series VS13647

Brands by name

Popular brands

ViewSonic Pro8400 Series VS13647, User Manual

Search results

Summary of Contents for Pro8400 Series VS13647

Reviews:

Related manuals for Pro8400 Series VS13647

Brands by name

Popular brands